Well I'm back. After far too long away I'm finally here with something new. Unfortunately it has nothing to do with Fellblades, but I digress....
As the title hints at this is all about true scale vehicles, and a lot of them. The project is for a client who has a growing collection of true scale Space Marines but wanted vehicles of the same scale. As I had already been pondering about how to do such a project I jumped at the chance to give it a try (especially with someone else's money). So here we go....
First up are the Rhinos as they will be the basis for most of the army. The trick was going to be how to true scale the current kit while still making it easy to assemble. As I recently had done an Mk1 Rhino conversion kit I looked at that for inspiration and discovered the solution. Like the Mk1 kit I would use large panels on either side but these would increase the length, width, and height of the model. First up I had to cut the Rhino track sections in half:
With the exhaust pipes cut off I designed a plate with a spacer in between that increased the length about 3/4 of an inch and added 0.25 inches to the height. A scratch built wheel was also added on the spacer. Also to keep with the Mk1 theme a round door, running board, and new exhausts were added:
A spacer was also made for the inside of the Rhino:
Finally the track sections were widened 0.25 inches so that the Land Raider treads can be used:
So there's the start. Once these are finished and detailed up I will make molds of the pieces so that I can produce enough of these parts for all ten Rhino chassis.
The challenge after that is figuring out the mods for the rest of the body. As always, more to come....