WC_Dave
12-19-2012, 10:06 AM
Thought I would share my World Eaters project here. First up a little back ground on the project.
With the release of the 6th Edition Chaos Codex, I have been jazzed up to redo my World Eaters army. I first became a convert to Chaos back in 3rd edition. This was back with the original Chaos Codex release in 3rd. Before any Chapter Approved articles or any FAQ's. Like most teenage boys, Chaos had the angst and look that proved irresistible.
Back then, we had the awesome plastic Khorne Berzerker set. That set was the Bee's Knees back in early 3rd. My army of 12 years ago was made entirely of those models. Sadly, GW has done nothing to improve or resculpt them since. Sure, we have the Forgeworld Conversion Kit, but for a gamer like myself, I do not like using conversion kits that are readily available to everyone. Therefore, I set about to make my Khorne Berzerkers out of the new Dark Vengeance Chosen models, along with various other bits.
The project have set myself upon, can be done either as cheap or in my case on the more expensive side. It all depends on which bits you choose to use. If you choose to use the heads and arms from the current Berzerker models, you can keep the cost of the conversions very cheap.
http://1.bp.blogspot.com/-QXNY5bbFnuw/UM5B6j-EqpI/AAAAAAAABBU/9dTCZ6nZlKY/s400/110_1566.JPG
First thing needed is a set of the Dark Vengeance Chosen Models
http://4.bp.blogspot.com/-Lnb8NwERMcI/UM5CQIrHoCI/AAAAAAAABBc/ninCRnjgKts/s400/110_1567.JPG
Next, the heads from the new WFB WoC Skullcrushers
http://2.bp.blogspot.com/-QHMVT6qF3N0/UM5CgEAVP0I/AAAAAAAABBk/_TPFNu8Jx28/s400/110_1568.JPG
Some Forgeworld Chain Axes
http://2.bp.blogspot.com/-4B0jdSYRlrU/UM5DBLXobeI/AAAAAAAABBw/XPqKBm7ruIs/s400/110_1569.JPG
A large assortment of extra CC arms
With the release of the 6th Edition Chaos Codex, I have been jazzed up to redo my World Eaters army. I first became a convert to Chaos back in 3rd edition. This was back with the original Chaos Codex release in 3rd. Before any Chapter Approved articles or any FAQ's. Like most teenage boys, Chaos had the angst and look that proved irresistible.
Back then, we had the awesome plastic Khorne Berzerker set. That set was the Bee's Knees back in early 3rd. My army of 12 years ago was made entirely of those models. Sadly, GW has done nothing to improve or resculpt them since. Sure, we have the Forgeworld Conversion Kit, but for a gamer like myself, I do not like using conversion kits that are readily available to everyone. Therefore, I set about to make my Khorne Berzerkers out of the new Dark Vengeance Chosen models, along with various other bits.
The project have set myself upon, can be done either as cheap or in my case on the more expensive side. It all depends on which bits you choose to use. If you choose to use the heads and arms from the current Berzerker models, you can keep the cost of the conversions very cheap.
http://1.bp.blogspot.com/-QXNY5bbFnuw/UM5B6j-EqpI/AAAAAAAABBU/9dTCZ6nZlKY/s400/110_1566.JPG
First thing needed is a set of the Dark Vengeance Chosen Models
http://4.bp.blogspot.com/-Lnb8NwERMcI/UM5CQIrHoCI/AAAAAAAABBc/ninCRnjgKts/s400/110_1567.JPG
Next, the heads from the new WFB WoC Skullcrushers
http://2.bp.blogspot.com/-QHMVT6qF3N0/UM5CgEAVP0I/AAAAAAAABBk/_TPFNu8Jx28/s400/110_1568.JPG
Some Forgeworld Chain Axes
http://2.bp.blogspot.com/-4B0jdSYRlrU/UM5DBLXobeI/AAAAAAAABBw/XPqKBm7ruIs/s400/110_1569.JPG
A large assortment of extra CC arms