ResinForge's Sons of Horus - 13th Genetic Research Cohort

[ResinForge]

I will keep the talking short and pictures at Max.

Quick backstory is simple. They are a late Heresy Era Sons of Horus force. Taking place right after the fall of Horus.

I bring you my Legion Praetor, (also counts as Fabius Bile in regular 40k games)

He needs a bit more work around the servo skull (needs cables) and the 2 demon helpers need tools. Otherwise hes good to go. Does anything look "off"?

http://i1302.photobucket.com/albums/ag126/resinforge/countsas_fabius1.jpg

http://i1302.photobucket.com/albums/ag126/resinforge/countsas_fabius2.jpg

http://i1302.photobucket.com/albums/ag126/resinforge/countsas_fabius3.jpg


Still a bit of a WIP but here is the Standard Bearer and right hand man for the Praetor. He will get a shoulder pad on his right arm to match the Praetors. The left pad is a filed down astral claws pad that will be a large eye of Horus.

Oh and for the base, I will do all the armies bases at once. Gives them a very uniform look.

http://i1302.photobucket.com/albums/ag126/resinforge/standard1.jpg

Continued.

[ResinForge]

http://i1302.photobucket.com/albums/ag126/resinforge/standard2.jpg

This is the overall Terminator style im going with for the army. I like the Cat terminators but dont like the slightly better save. Id rather be quick on the feet so these were born.

http://i1302.photobucket.com/albums/ag126/resinforge/terminator1.jpg

The first of 3 squads.

http://i1302.photobucket.com/albums/ag126/resinforge/terminator_squad1.jpg

[Kirsten]

thos look absolutely amazing, stunning details on the HQ

[SotonShades]

Not sure about the mutated power claw on the terminator, but otherwise a stunning set of conversions. I love the idea of the Praetor having little deamon helpers. very much looking forward to seeing how the rest of the army comes together.

[ResinForge]

Not sure about the mutated power claw on the terminator, but otherwise a stunning set of conversions. I love the idea of the Praetor having little deamon helpers. very much looking forward to seeing how the rest of the army comes together.

I wasnt sold on it either. Ive since changed it to be the old 2nd edition chaos marine power fist/claw. Ive also added trophies and more detail on the grenade harness.

Thanks for all the support guys!

I was digging around my bits stores inventory for what I need to make the first 3 Breachers. I plan to include 2 ten man units, each with 2 grav guns.

These first 3 show the modified shield designs and the studded mk2 shoulder pad, similar to the studded mk4 pads. Those gave me the idea for a more heavy armor mk2 but not quite mk3.

http://i1302.photobucket.com/albums/ag126/resinforge/breacher_squad1wip.jpg

[ResinForge]

I went ahead and decided to include a Siege Breaker as my Lt in the army. Seems fitting since the vast troops choice will be filled with Breachers.

I went rather heavy on the conversion, using tiny bits from several FW kits. It took me a bit of time to remove the bits used from my bits store but it was well worth it based on how sweet the conversion came out!

http://i1302.photobucket.com/albums/ag126/resinforge/seigebreaker.jpg

http://i1302.photobucket.com/albums/ag126/resinforge/seigebreaker1.jpg

With his Wrecker and Tank hunter special rules, I built 2 semi unique weapons. A "Chain Claw" basically a lightning claw with Wrecker and a modified combi bolter with more detailed Melta for the Tank Hunter ability. I still need to add some antenna to represent his Vox.

Comments? Thoughts?

[ResinForge]

Paint is still very much in progress but I did want to see how the scheme will look.

http://i1302.photobucket.com/albums/ag126/resinforge/seigebreaker_pip1.jpg

http://i1302.photobucket.com/albums/ag126/resinforge/seigebreaker_pip2.jpg

http://i1302.photobucket.com/albums/ag126/resinforge/seigebreaker_pip3.jpg

I do plan to add weather pigments and other goodies but not until the army is painted to an equal level. Its the only real way to get the same results with weathering on them all.

Im always open to feedback and comments!

[ResinForge]

Almost done with the Siege Breaker. He still needs a few minor touch ups and tuft grass added to the base. other then that, hes good to go.

http://i1302.photobucket.com/albums/ag126/resinforge/seigebreaker_pip5.jpg

http://i1302.photobucket.com/albums/ag126/resinforge/seigebreaker_pip6.jpg

http://i1302.photobucket.com/albums/ag126/resinforge/seigebreaker_pip7.jpg

[White Tiger88]

Look good, I think mixing in a bit more teal would make them look AMAZING though.

[ResinForge]

Look good, I think mixing in a bit more teal would make them look AMAZING though.

Teal to me is a tad to "off" from the colors described in the Betrayal book. The pictures arent the best but I think it first the early sea green perfectly. My guys arent full blow siege of Terra, just on thier way to corruption. :)

On a side note, Resin Forge (link in sig) is now offering 20% off all FW bits, some GW weapons and now spreading into books, such as rulebooks, HH book Volume 1 and much more!

Just entire the discount code Discount20 upon checkout! And yes we do ship world wide for a flat rate of 5 dollars!

[ResinForge]

More work finalizing the Siege Breaker. Tuft added still needs minor weathering to match the base and nees the chem tube on the chest painted,

http://i1302.photobucket.com/albums/ag126/resinforge/seigebreaker_near_finish1.jpg

http://i1302.photobucket.com/albums/ag126/resinforge/seigebreaker_near_finish2.jpg

http://i1302.photobucket.com/albums/ag126/resinforge/seigebreaker_near_finish3.jpg

http://i1302.photobucket.com/albums/ag126/resinforge/seigebreaker_near_finish4.jpg

Comments as always are very much welcome to keep me motivated!

[ResinForge]

Thanks again for all the support and comments! Its whats keeping me motivated with updates all the time!

Next up is the 2nd Apothecary. hes made from more bits then I can count but if anyone is interested, I can break it down bit by bit if anyone wants to recreate it.

I wanted to show mutations begining as well as the fact he is still an Apothecary. I think the cloak and backpack really sell it.

http://i1302.photobucket.com/albums/ag126/resinforge/apoth1_WIP1.jpg

http://i1302.photobucket.com/albums/ag126/resinforge/apoth1_WIP2.jpg

What do you guys think! Paint wise im thinking the green with white to show hes an apothecary.

Comments as always are welcome, good or bad.!

[SotonShades]

Nice work. Not too sure about the mouthpiece, but a better picture/different angle might change that. I like the claw just creeping out from under the cloak. A very nice touch :)

[ResinForge]

Nice work. Not too sure about the mouthpiece, but a better picture/different angle might change that. I like the claw just creeping out from under the cloak. A very nice touch :)

Chaos FTW!

[DrLove42]

Bane mask FTW

You merely adopted the Heresy, I was born in it!

[Hydra]

I really like this first conversion.

[ResinForge]

Bane mask FTW

You merely adopted the Heresy, I was born in it!


I really like this first conversion.

Thanks guys!

Bases need a bit more work but it gives you all an idea how the army itself will be based. These first 10 are for the siege breachers.

http://i1302.photobucket.com/albums/ag126/resinforge/breacher_bases1_zps03baa781.jpg

Speaking of the Breachers, I did more work on the vox guy as well as work on a soon to be better conversion for a lascutter.

http://i1302.photobucket.com/albums/ag126/resinforge/seigebreaker2_zpsd63504ab.jpg

http://i1302.photobucket.com/albums/ag126/resinforge/seigebreaker3_zpsefae1b45.jpg

http://i1302.photobucket.com/albums/ag126/resinforge/seigebreaker4_zpsf03585cf.jpg

[SotonShades]

Very nice. The bases look like they'll be quite cool once painted up. Both conversions look great too, though surely that is more of a Plas-cutter?

[ResinForge]

Very nice. The bases look like they'll be quite cool once painted up. Both conversions look great too, though surely that is more of a Plas-cutter?

Sadly Breacher squads cant get plasma cutters so ill mod it and remove the coils to make it a fancy las cutter as I hate the boarding party one :)

Ive go ahead and created a Facebook and Twitter page for better social contact with customers and to improve overall quality we offer. Im more then willing to work an advertising plan with the owners here or a trade of services as well. If this post violates any rules, please accept my apologies.


About


Resin Forge is the one stop shop for all things hobby Resin parts, focusing on Forge World products for now with plans to expand into other lines, supplies, terrain and much more with your help!


Company Overview


Hey Guys and Gals, my name is Kim, One of the three co owners to our new store, Resin Forge!

I was introduced by a good friend to games workshop a few years back and have become not only a great enthusiast but active member in the hobby community.passion is making custom armies but most of all painting models!

The same goes for our other two co owners! As of right now we are focusing on Forge World Resin and do plan to spread to other game systems such as Infinity and Malifaux. We also plan to include tools, supplies and extra goodies to really spice up your custom armies!


General Information


The Resin Forge Store page for upcoming releases and questions regarding products and orders:

http://www.facebook.com/pages/Resin-Forge-Store/464657756903319?ref=hl

The Resin Forge Twitter page for more updates at a quicker pace direct to your mobile devices:

https://twitter.com/ResinForgecom

Please do add us on Facebook for deals and special offers as well as liking our page . Twitter is there for those that prefer it with both being linked to the actual webstore and system itself.

[Fizzybubela]

How did you get the combi-melta on his left hand. Also are there any pictures of the squad's sergeant yet?

[ResinForge]

How did you get the combi-melta on his left hand. Also are there any pictures of the squad's sergeant yet?

I cut down a CC thunder hammer left hand and replaced it with the Ferrox Combi Bolter. :)

The Termie squad SGT and his full squad are just waiting for some SoH brass to complete them.

------

Update time!

There have been tons of requests on how people can make the 'Fabius' counts as. Well here you all go:

http://i1302.photobucket.com/albums/ag126/resinforge/countsas_fabius1.jpg

Hello everyone! Resin Forge here with the start of a series of guest posts., starting with a counts as 'Fabius Bile' for a Sons of Horus Heresy Era army. Before we begin, yes, the actual Fabius Bile was a member of the Emperor's Children but please keep in mind this is simply a character recreation set in the Horus Heresy time period, not an actual recreation of him during that period (although with shoulder pad swaps it could count as him very easily)

Lets jump right into what bits the conversion is made up of.



Head:

Right side - FW Mk2 Tank Commander head

Left side - FW Mk2 Apothecary head with the lens intact.

GS studs to connect the lens portion of the helmet.

FW Inquisitor Iron Halo

FW Inquisitor Lok Servo Skull Scribe Arms

Torso:

FW Red Scorpion Magister Loth Honor Guard Torso

FW Apothecary Vial attached

FW Mk2 Backpack Fan Vent

Belt:

FW Plague marine shoulder pad decaying head

FW Inquisitor Solomon Lok Data Servitor back module

GS Cables

Backpack:

FW Astral Claws Valthex Techmarine Backpack

FW Mk2 Apothecary Backpack Vials

Plastic Imperial Guard Servo Skull Half Halo

Mk2 Backpack Bottom Side Vents

Pewter Fabius Bile Backpack Mechanical Arms

Plastic Imperial Guard Vox Speaker

Finecast Dark Eldar Haemonculus IV Bag

Right Arm:

Mk2 Apothecary Arm

Mk2 Closed Assault Hand

Finecast Thunder Cannon Techmarine Staff

Finecast Thunder Cannon Techmarine Plasma Cutter

Pewter Inquisitor Servo Skull

Black Legion Pewter Shoulder Pad

Left Arm:

Mk4 Apothecary Arm

Mk4 Bolt Pistol

Finecast Thunder Cannon Techmarine Backpack Sensor

FW Inquisitor Solomon Lok Data Servitor cable connector

Black Legion Pewter Shoulder Pad

Legs:

Pewter Iron Hands Bionic Legs

Base:

FW Angron Fallen Marine 40mm Base

2 Pewter Warhammer Fantasy Familiars

Plastic Imperial Guard Servo Skull

FW Titan Tech Priest Mechanical Servo Arm

FW Flamer Tank

FW Magister Loth Honor Guard Helmet


Where to begin..... I suppose its best to start in the same order as the parts are listed above.

1) The head is a combo of the 2 halves from the Mk2 Tank Commander head and the Mk2 Apothecary Heads with the Iron Halo attached to the back of it. The brown lens was added based on plastic rivets. The Lok Servo skull Scribe arms are attached to the lower half of the helmet before its glued on.

2) The torso is almost entirely based around the Loth Honor Guard torso with the Red Scorpion icon shaved off and replaced with the vent fan from a Mk2 backpack. The vial from the Apothecary set was then mounted on the right side of the breast, on top of a GS mount.

3) The belt items were taken from 2 bits. The first being a severed, decaying head taken from one of the FW Plague Marine shoulder pads and the second, coming from the Inquisitor Lok Data Servitors back module. It was carefully cut off and trimmed down to be a sort of scanning device.

4) The backpack is built around the Astral Claws Valthex Techmarine pack. The side mounts are cut down and replaced with the pewter Cogs that become the mounting for the Fabius Bile Mechanical arms. On the top, on both sides above the cogs and mechanical arms the small Mk2 backpack lower vents are added. The Mk2 Apothecary backpack vials are then mounted on the center with the plastic servo skull half halo cut and removed to be mounted onto them. Finally a single plastic brown rivet was added as a lens for the skull, creating a mini servo skull. On the rear of the backpack, the cut down Imperial Guard Vox Speaker was then mounted in the center with the Finecast Dark Eldar Haemonculus IV Bag mounted alongside of it with the hose connecting to the bottom of the speaker.

5) The right arm is built around the Mk2 Apothecary arm. Before anything was done the hand was removed and the shoulder mount was cut off to change the position of the arm. Once the arm was reglued to the shoulder, the Mk2 closed hand was then drilled out to allow the staff to fit in its grip. It was then mounted onto the arm. The staff itself is made up of the lower half of the techmarine staff with the plasma cutter barrel cut off and glued just above the hand. I did pin all of this to make to stable. The pewter servo skull was trimmed down to then fit on top of the plasma cutter barrel and coolant ribs. Once this was all done the shoulder pad was added.

6) The left arm is a bit easier then the right. Its almost entirely the Mk4 Apothecary arm. Only the hand was removed, a bolt pistol from the Mk4 Assault set was added. The front half of the bolt pistol was first cut off and the finecast techmarine sensor was added in its place. The small tip was cut off and replaced by the small data servitor cable connector to make a sort of needle launcher. Finally the shoulder pad was added.

7) The legs are simply the pewter Iron Hand legs with a slight bend to make them fit onto the fallen marine base. A single GS cable was added to make both sides look similar.

8) The base is from the Primarch Angron. The floating Servo skull is a cut down plastic Imperial guard on with a Titan Tech Priest small servo arm added so it could be picking the geneseed from the corpse. A Magister Loth honor guard helmet was added to spice it up. The 2 familiars are simply picked from the Warhammer Fantasy Familiar blister. Slight reposing was done on the familiar in the front to be standing on the fallen marine. Finally 'Fabius' was pinned in place so that he could be stable and yet be removed for painting.



That's how he was created! If anyone has any questions at all, please do ask and ill be more then happy to help explain it better. This is my first tutorial so please forgive me if anything is confusing. And now with Bitzbox and Resin Forge teaming up, all of this conversion and future conversions can easily be built by you, the readers! Stay classey everyone and remember, support for your bitz suppliers means support for amazing conversions!

[ResinForge]

Sons of Horus Command Squad Company Champion

http://i1302.photobucket.com/albums/ag126/resinforge/comp_champ_prepaint1.jpg

http://i1302.photobucket.com/albums/ag126/resinforge/comp_champWIP2.jpg

http://i1302.photobucket.com/albums/ag126/resinforge/comp_champWIP3.jpg

http://i1302.photobucket.com/albums/ag126/resinforge/comp_champWIP4.jpg

[ResinForge]

SoH command Squad Plasma gunner.

http://i.imgur.com/GjTva.jpg

[Fizzybubela]

Nice! Where's the plasma gun from?

[ResinForge]

Nice! Where's the plasma gun from?

2nd edition pewter Raptor.

[ResinForge]

Look good, I think mixing in a bit more teal would make them look AMAZING though.

The bottom rear shot of the Siege Breaker shows the actual color far better then the crappy pictures I take.

http://i1302.photobucket.com/albums/ag126/resinforge/soh_triple_comp1.jpg

Sons of Horus Consul Moritat.

http://i1302.photobucket.com/albums/ag126/resinforge/moritat_comp1.jpg

I made up the whole techmarine style within the legion as a sort of "pre obliterator idea" In this case, they use some forbidden mechanicus tech that allows them to warp a short distance away. the problem quickly came to like that they were then at risk for possession. These guys tend to use possession as a sort of tool, again, sort of akin to 40k obliterators.

Not the best fluff but explains the super large backpacks him and the destroyers will all have instead of normal jump packs.

Next up...


http://i1302.photobucket.com/albums/ag126/resinforge/termie_seige_WIP1.jpg
He will have the armored tabard that the Deathshroud have. I added shin rivets like mk2 and mk3 armor has as well as various other do dads.

The real work will come once the Deathshroud arrive as these guys will escort the Siege Breaker.

[ResinForge]

Full 8 man Support squad with Volkite Calivers and a Sgt with Scanner.

http://i1302.photobucket.com/albums/ag126/resinforge/support_wip2_zps716f3344.jpg

[Fizzybubela]

Nice! :)

[White Tiger88]

Looking great dude! I like the color scheme as well.

[ResinForge]

Thanks guys!

The first Cata Terminator Sgt of 3 five man squads of them. The regular Terminators will use the standard Tartaros torso and helmet but other wise will be just like the Sgt.

http://i1302.photobucket.com/albums/ag126/resinforge/termietroop_wip1_zps6164c018.jpg

[Fizzybubela]

Looking good! :D Looks a bit like the type of Terminators that I'm going to make. :) Also how difficult was it to remove the Deathshroud armour plating from its legs?

[ResinForge]

Looking good! :D Looks a bit like the type of Terminators that I'm going to make. :) Also how difficult was it to remove the Deathshroud armour plating from its legs?

It would be pretty hard without damaging the legs and needing serious GS work to repair the damage. I simply made my own GS versions. :)

And a small FYI Resin Forge sells all the bits needed to make any custom terminator armor you could imagine!

[Fizzybubela]

Well I don't really need the legs so it wouldn't really matter if I damaged them. :) I'll keep Resin Forge in mind if I need any bits without wanting to buy the whole thing from FW. :)

[heretic marine]

looking really good. can't wait to see more.
I order you by the power of the four, great, and all powerful gods to POST MORE NOW!!! or face their wrath, no bigy *laughs maniacally, then hides in a corner of your house*

[ResinForge]

Well I don't really need the legs so it wouldn't really matter if I damaged them. :) I'll keep Resin Forge in mind if I need any bits without wanting to buy the whole thing from FW. :)

Thats what we are here for!!




looking really good. can't wait to see more.
I order you by the power of the four, great, and all powerful gods to POST MORE NOW!!! or face their wrath, no bigy *laughs maniacally, then hides in a corner of your house*

Poof! Ask and it appears!

Ive mainly been posting daily on the FB group page so here are a number of updates.

The Chaplain seen earlier was eaten by my dog. I salvaged what I could and rebuilt the rest. I think he came out better then better.

http://i1302.photobucket.com/albums/ag126/resinforge/rebuild_chappy_WIP1_zps1ade5979.jpg

Next is the first 4 Veteran Tactical Marines with the Outflank ability and Suspensor Web on the Heavy Bolter.

http://i1302.photobucket.com/albums/ag126/resinforge/vet_tac_wip2_zpsf94bfd51.jpg

[DrLove42]

So....your chaplain has been through a dog?

[ResinForge]

So....your chaplain has been through a dog?


Parts of him that were replace, yes.

[ResinForge]

Completed after dog accident. Sons of Horus Chaplain

http://i1302.photobucket.com/albums/ag126/resinforge/champ_comp1_zps695af989.jpg

[Fizzybubela]

Awesome! :D

[ResinForge]

Last 5 Veteran tactical marines for Vet Squad 1. They will almost always be a simple outflank squad.

http://i1302.photobucket.com/albums/ag126/resinforge/vet_tac_wip3_zps1dec521b.jpg

[Fizzybubela]

Nice! :)

[ResinForge]

First Plasma Blaster Terminator.

http://i1302.photobucket.com/albums/ag126/resinforge/plasma_termieWIP1_zps3d9d36ed.jpg

[Fizzybubela]

Nice! :) What's on the bottom of the chain at his left leg?

[ResinForge]

Nice! :) What's on the bottom of the chain at his left leg?

A severed head.

Ive done more work on the 2nd Terminator squad Sgt. he still needs gaps filled, GS details and the 2 chain flails from the Rampager set to be added to his weapon.

http://i1302.photobucket.com/albums/ag126/resinforge/termie_WIP4_zpsaab6bc12.jpg

[Fizzybubela]

Awesome! :D I look forward to seeing him completed. :)

[ResinForge]

Wednesday Poll:

Would plastic storage cases for organizing bits be a product anyone would be interested in Resin Forge stocking? Like for 'yes' , comment for a 'heck yes' or a 'heck no' and let us know why!


http://resinforge.com/ourshop/prod_2521986-Bits-Box-Medium-Stackable.html (http://resinforge.com/ourshop/prod_2521986-Bits-Box-Medium-Stackable.html)

Here is the medium sized cabinet http://resinforge.com/ourshop/prod_2522005-Bits-Storage-Cabinet-Medium.html


Here is the large cabinet http://resinforge.com/ourshop/prod_2522008-Bits-Storage-Cabinet-Large.html

Also, what other items would you like to see Resin Forge carry?

Items we are considering are things such as green stuff, modeling tools, or anything of the like to help converting along with the Bits Boxes we will be carrying later this week.

http://resinforge.com/

If you have better ideas or comments to help, or just say how its not a good idea! We are open to all expansions hobby related and conversion related!

[ResinForge]

Wednesday Poll:

Would plastic storage cases for organizing bits be a product anyone would be interested in Resin Forge stocking? Like for 'yes' , comment for a 'heck yes' or a 'heck no' and let us know why!


http://resinforge.com/ourshop/prod_2521986-Bits-Box-Medium-Stackable.html

Here is the medium sized cabinet http://resinforge.com/ourshop/prod_2...et-Medium.html


Here is the large cabinet http://resinforge.com/ourshop/prod_2...net-Large.html

Also, what other items would you like to see Resin Forge carry?

Items we are considering are things such as green stuff, modeling tools, or anything of the like to help converting along with the Bits Boxes we will be carrying later this week.

http://resinforge.com/

If you have better ideas or comments to help, or just say how its not a good idea! We are open to all expansions hobby related and conversion related!

[SotonShades]

I'm going with heck no mostly because I highly doubt that, including shipping costs, you are going to be able to sell me those boxes cheaper than going in to the local hardware/diy stores and getting them there. But I am in the UK, so my views are skewed on that front.

[ResinForge]

I'm going with heck no mostly because I highly doubt that, including shipping costs, you are going to be able to sell me those boxes cheaper than going in to the local hardware/diy stores and getting them there. But I am in the UK, so my views are skewed on that front.

From what i've seen I can always beat the costs at stores and even more online places, even when it comes to international. Shipping costs are still the flat rate of 5 dollars and the main key is, most people that would buy the bits boxes would also most likely buy bits to fill them.

if you have any other points such as price you can get yours for that match the size and quality Resin Forge will begin selling, please do share as we would always love to lower cost even more.

[Dimitrios]

Really like this thread! Great conversions and the pace at which the army is comming together is staggering considering the attention to detail on each model. I look forward to a group shot of all your "dudes" :)

[ResinForge]

Sorry for the poor quality picture but it does show the current Sons of Horus army. Close up pictures can be seen all throughout the FB group here.

As always comments, good and bad are welcome!

http://i1302.photobucket.com/albums/ag126/resinforge/army_wip1_zps52e2546f.jpg

[Fizzybubela]

I think it looks awesome! :D

[ResinForge]

I think it looks awesome! :D


Thanks for the motivation!

Should the Legion Standard be replaced with a converted 25 anni banner? Id remove the crimson fist words, add Horus Luprical and add an eye of Horus in the center of the star.

Yay, or nay?

http://i1302.photobucket.com/albums/ag126/resinforge/standard_wip2_zps5b332640.jpg

[SotonShades]

a thousand times yes

[Zac78]

Yay

[Fizzybubela]

Yay. But what are you going to do with the original banner?

[ResinForge]

Yay. But what are you going to do with the original banner?

Not sure yet. I have all of the original 2nd edition chaos banners like this one, so im sure ill figure something out.

Got the first of the 2 flails on the terminator Sgt.

http://i1302.photobucket.com/albums/ag126/resinforge/termie_WIP5_zpsd34df7a0.jpg

[Fizzybubela]

Nice. :)

[ResinForge]

Teaser:

http://i1302.photobucket.com/albums/ag126/resinforge/contemp_two_wip1_zpsd86f25b0.jpg

[ResinForge]

Sons of Horus Legion 2nd Contemptor, 3rd Talon

http://i1302.photobucket.com/albums/ag126/resinforge/contemp_two_wip2_zps81964878.jpg

Still needs GS work and gap filling around the brass etch areas.

[Fizzybubela]

That looks great! :D Would a MK2 crest fit on where you put the topknot on the Contemptor?

[ResinForge]

That looks great! :D Would a MK2 crest fit on where you put the topknot on the Contemptor?

Actually, yes.

[Fizzybubela]

Great! :D

[ResinForge]

Ready for paint.

http://i1302.photobucket.com/albums/ag126/resinforge/contemp_two_wip3_zps84b578ca.jpg

[ResinForge]

Sons of Horus Justaerin Squad WIP

http://i1302.photobucket.com/albums/ag126/resinforge/justaerin_wip1_zps3a327ef5.jpg

[ResinForge]

Sons of Horus Justaerin Terminators Final WIP. Needs the last bit of basing and some minor GS then its off to paint!

http://i1302.photobucket.com/albums/ag126/resinforge/justaerin_wip2_zps79652ba4.jpg

[Fizzybubela]

They look great! Is there going to be a banner for them?

[ResinForge]

They look great! Is there going to be a banner for them?

I wasnt going to but it seems the general feedback is they should either have a banner bearer or the sgt have a back banner. Ill figure something out.

I wanted to mess around with the MIG set shown earlier. I finished the Contemptor's knee so far.

http://i1302.photobucket.com/albums/ag126/resinforge/contemp_two_pip1_zps945d58fd.jpg

Good? Bad?

[Fizzybubela]

Good. :)

[ResinForge]

More paint in progress for the Sons of Horus Contemptor.

http://i1302.photobucket.com/albums/ag126/resinforge/contemp_two_pip2_zps82ad7856.jpg

Feedback is always welcome!

[Fizzybubela]

I think it looks quite nice. :) As always I'm looking forward to seeing it finished. How would you suggest I cut the armour plating between the Deathshroud Terminator legs.

[ResinForge]

I think it looks quite nice. :) As always I'm looking forward to seeing it finished. How would you suggest I cut the armour plating between the Deathshroud Terminator legs.

A really sharp xacto and cut the sides first then a small cut at the belt area then bend back.

Sons of Horus Veteran Marine - WIP - Still needs details added and some removed.

http://i1302.photobucket.com/albums/ag126/resinforge/ccvet_wip1_zps407b17a2.jpg


Legion Breachers, Legion Recon Marines, Legion Outriders and of course the Mechanicum Thallax will be in hand within the week! www.ResinForge.com (http://www.ResinForge.com)

The demand is very high on the bits from them, so if you want to get them while the iron is hot, act now! You can reply here or send a message to us and we will gladly put away any bits from any of the sets that you may need!

[ResinForge]

Ive decided to go a bit more 'Chaosy' with the SoH Legion CC Veteran Tactical Marines. Still needs a backpack, but im torn on which to use, a FW one of any type, or a normal plastic chaos marine pack.

http://i1302.photobucket.com/albums/ag126/resinforge/ccvet4_wip1_zps0a649278.jpg

Opinions are VERY much welcome?

[Fizzybubela]

I'd go with a MK2/3 backpack.

[ResinForge]

I'd go with a MK2/3 backpack.

I think thats the route ill be taking with these as they are CC assault troopers.

Excuse the horrible quality photo. Its 730 am on Sunday and I had a rough night. I figured id work on this guy.

The chipped paint doesn't even show the highlights, but that's ok, ill just buy Photoshop and make sure all future pics are actually decent!

I'm always open to feedback. I do plan to weather the force like the Contemptor, with heavy dirt and dust along with some limited rust and chipped paint. So if its not a good idea, I'm all for reasons behind it!

http://i1302.photobucket.com/albums/ag126/resinforge/ccvet4_pip2_zps3535981b.jpg (http://s1302.photobucket.com/user/resinforge/media/ccvet4_pip2_zps3535981b.jpg.html)

[Fizzybubela]

I think it's a great idea! :D You don't see too many Sons of Horus armies with rust on.

[ResinForge]

I think it's a great idea! :D You don't see too many Sons of Horus armies with rust on.

I wanted to go with a long deployment either on Istaavan or the march to Terra!

**NEWS FLASH**

Thallax, Legion Outriders, Legion Recon Marine, Legion Breachers, HH plasma Guns, HH Melta Guns and HH Rotor Cannons will all be in stock in less then 12 hours.

Many bits and sets have been claimed but there are still more yet to be snatched up! Sadly its either first come first serve when they go live in the shop, or you can make a request to have something put aside for you via a message here (or email direct to us).

[ResinForge]

http://i1302.photobucket.com/albums/ag126/resinforge/order5_zps474ff865.jpg (http://s1302.photobucket.com/user/resinforge/media/order5_zps474ff865.jpg.html)

First restock box (of the day/this week) arrived. This one contains Thallax, Legion Recon Marine, Legion Breachers, HH plasma Guns, HH Melta Guns, HH Rotor Cannons and more Emperors Children Mk4 Shoulder Pads.

Tons of new bits for all those great conversion ideas everyone has! All items can either be claimed/requested or can be bought direct from the store.

[ResinForge]

http://i1302.photobucket.com/albums/ag126/resinforge/order5_zps474ff865.jpg (http://s1302.photobucket.com/user/resinforge/media/order5_zps474ff865.jpg.html)

First restock box (of the day/this week) arrived. This one contains Thallax, Legion Recon Marine, Legion Breachers, HH plasma Guns, HH Melta Guns, HH Rotor Cannons and more Emperors Children Mk4 Shoulder Pads.

Tons of new bits for all those great conversion ideas everyone has! All items can either be claimed/requested or can be bought direct from the store.

[ResinForge]

http://i1302.photobucket.com/albums/ag126/resinforge/thallaxsheets_zps21811ccb.jpg (http://s1302.photobucket.com/user/resinforge/media/thallaxsheets_zps21811ccb.jpg.html)

Thallax are all in and being stocked in the store as we speak (site in sig)

[ResinForge]

Recon Marines are all up with pictures along with the Legion Breachers.

http://www.resinforge.com/ourshop/cat_725424-Mk4-Legion-Recon-Marines.html

http://www.resinforge.com/ourshop/cat_725401-Mk-3-Legion-Breachers.html

As are HH plasma guns, Meltaguns and Rotor Cannons.

http://www.resinforge.com/ourshop/cat_665292-Weapons.html

[ResinForge]

I realized I havent updated..

Sniper Rifle Design for my Vigilator.

http://i1302.photobucket.com/albums/ag126/resinforge/vigilator_wip1_zps52201f48.jpg (http://s1302.photobucket.com/user/resinforge/media/vigilator_wip1_zps52201f48.jpg.html)

[Fizzybubela]

Looks great! :D What's the Vigilator going to look like?

[ResinForge]

Looks great! :D What's the Vigilator going to look like?

Nothing to fancy, just a modified Recon Marine with custom backpack and helmet.

As many others have already thought of, I wanted to make a small Tau Force for when 40k is played. At the same time I also wanted a force I could use in 30k. With the Mechanicum rules being pretty small for now, what better way to field Thallax then as Battlesuits!

I know, ive already gotted ripped for this idea as being stupid on reddit but honestly, my gaming group and I all think its a neat idea.

First up is a Thallax (battlesuit) armed with dual fusion cannons and a missile pod. I'm very much open to ideas, even if its just, "your idea sucks".

http://i1302.photobucket.com/albums/ag126/resinforge/tau_thallaxsuit_zpse41354ec.jpg (http://s1302.photobucket.com/user/resinforge/media/tau_thallaxsuit_zpse41354ec.jpg.html)

[Fizzybubela]

I think it looks good. :)

[rpricew]

That proxy suit is awesome! Would love to see it painted up!! Is it a one off or a kit? How is it made?

[ResinForge]

That proxy suit is awesome! Would love to see it painted up!! Is it a one off or a kit? How is it made?

Its just a Thallax from FW chopped up and converted :)